Firmware Restoration - Win7
IMPORTANT : Ensure you perform Factory Restore procedure BEFORE & AFTER flashing the firmware.
Download the latest ASUS RT-N13U-B1 Utilities and install on your computer/laptop : http://my.asus.com/Networks/WiFi_Networking/RTN13U/#download
DO NOT connect any network cables except the one to your computer/laptop
Click to open the little network icon on bottom right screen, select the "Open Network & Sharing Center" option
Select the "Change adapter settings" option
You should see a list of all the interfaces here, disable all others except the LAN
Right-click on the LAN interface, select "Properties"
Select TCP/IPv4 option
Manually assign fixed IP: 192.168.1.10 / 255.255.255.0
Next, click "Start" and go to "Control Panel"
Select the "System and Security" option
Select the "Windows Firewall" option
Choose "Turn Windows Firewall on or off" option
Temporary turn-off the Windows Firewall
Now run the ASUS Utilities Firmware Restoration application, browse to locate the correct firmware on your computer/laptop
DO NOT click "Update" yet !!
On the device itself:
Back to the Firmware Restoration, click "Upload", DO NOT touch anything until it's fully completed, any interruption may brick the device !!
Once completed and the device rebooted successfully, click "Close", basically you may proceed to setup UniFi
Don't forget to do the following again:
After completing the above, you may proceed to setup UniFi.