RB750/750G Standard Setup File For UniFi


Standard UniFi setup file for RB750 & RB750G include basic firewall, port forward, QoS, just drag & drop to File list will do!

Pre-requisite:

It's always recommended to upgrade to latest stable package.

 


2011 June 09 (Current latest)

This setup file is based on RB700 Series V5.4 Combined Package which can be downloaded from official website
Standard UniFi setup file for:  RB750 or  RB750G


2011 April 24
This setup file is based on RB700 Series V5.1 Combined Package which can be downloaded from official website
Standard UniFi setup file for:  RB750 or  RB750G

This setup file is based on RB700 Series V5.0 Combined Package which can be downloaded from official website
Standard UniFi setup file for:  RB750 or  RB750G


2011 March 4
This setup file is based on RB700 Series V4.17 Combined Package which can be downloaded from official website or mirror here.
Standard UniFi setup file for:  RB750 or  RB750G


2011 March 1
This setup file is based on RB700 Series V4.16 Combined Package which can be downloaded from official website or mirror here.
Standard UniFi setup file for:  RB750 or  RB750G


 


Important steps before proceed:

  1. Backup the last good setting
  2. Hard reset the device

 

Use WinBox, click the radio button to locate the router, please be patient as it might take some time!

Once located, click to connect using IP address

Default user ID = admin  Password = blank (not require)

 

Go to Files

Then drag & drop the downloaded setup file to File List area

After the file is copied, click Restore

Click Yes to continue

Noticed the router will be disconnected, DO NOT touch anything until the device is completely restored & rebooted !!

 

Once the router's lights blink together, it means completely, wait for few second until it's settling down, then use WinBox to locate the device again, click to connect using MAC address

Default user ID = admin  Password = blank (not require)

 

Go to PPP, click the UniFi-Internet

Change to your own UniFi user ID and password (please be very sure you enter the correct user ID & password !!)

 

Go to IP --> Firewall

Change/add your own port forward IP address & port number based on your requirement

 

 

 

Go to Queues, select Queue Tree tab, change the download (Global-in) and upload (Global-out) maximum limit according to your internet package

 

 

Go to System --> Password, create your own admin password

 

 

 

Continue other setup:

Auto Time Update (NTP)