TL-MR3420 Ver1.2 [ UniFi Vlan Setup ]
Should anyone know how to get the IPTV vlan.600 to work, appreciate if you could email me (
), credit goes to you !
To continue the following setup, please refer HERE (use xxx-tl-mr3420-v1-squashfs-factoryxxx) on how to flash from factory to trunk and install LuCI webgui.
UniFi Internet Vlan.500
The Switch tab as show under Network section, this is the default, I didn't change anything.
Go to " Network --> Interfaces tab ", edit and setup the following WAN interface
Click Save & Apply when done
WinSCP login to the device, go to " /etc/config " folder, edit the file network as follows
Click Save button when done
The device connected to UniFi, enjoy
UniFi IPTV Vlan.600 (not working ....)
What I have tested so far: