D-Link DWA-192 WiFi Test on DIR-880L (Rev.A1)

(From previous post HERE)

WiFi testing based on iPerf3 with the following setup :

Note : The following test was based on my devices with specific settings (OS/software/version etc) and environment setup.  The wireless test results may vary depending on device/hardware/software/setting/environment.  This test is meant for my own reference only and should not be used for any benchmarking or comparison purposes.


The router's FW version, wireless and UniFi setup as follows:

2016-09-08 13.20.45-880LA1.jpg2016-09-08 13.20.56.jpg2016-09-08 13.21.38-UniFi.jpg2016-09-08 13.21.52.jpg2016-09-08 13.22.40.jpg2016-09-08 13.26.03-WiFi.jpg2016-09-08 13.26.18.jpg

Test scenario & condition :

  • PC & laptop runs on current latest Windows 10 64-bit with up-to-date updates
  • PC & laptop uses current latest iPerf3.1.3
  • 1 PC connect through the router's LANport and run iPerf3 as server, AntiVirus & Windows Firewall turn-off, no other apps running
  • The router is connected to UniFi internet during testing
  • PC/laptop will connect to the wifi, one device one band at a time, then run iPerf3 as client for 2 tests, normal and reverse (-R) test to the PC iPerf3 server
  • PC spec which is running iPerf3 as server :


WiFi Test @2.4GHz with DIY PC and laptop :

2016-09-08 14.32.13-GAH170NWiFi-DWA192-2G.jpg2016-09-08 14.33.47-GAH170NWiFi.jpg2016-09-08 14.53.28-T440-DWA192-2G.jpg2016-09-08 14.54.41-T440.jpg


WiFi Test @5GHz with DIY PC and laptop :

2016-09-08 14.36.31-GAH170NWiFi-5G.jpg2016-09-08 14.38.13-GAH170NWiFi.jpg2016-09-08 14.58.15-T440-5G.jpg2016-09-08 15.02.20-T440.jpg